From: Peter (peter@cyscoexpert.com)
Date: Wed Oct 16 2002 - 23:59:34 GMT-3
What kind of errors?
With IPSec tunnels, the router should encrypt the traffic based on the ACL
specification, so as long as the IP addresses of source and destination of
SSL packets are matched it should be OK. Unless you have NAT running then
you have to make sure that this traffic is denied NATting by setting up an
ACL and using a route-map in "ip nat source route-map ..." command.
Peter Puczko
#7247 (R&S, Security)
Phone (847) 674-3392
----- Original Message -----
From: "Nguyen, Thai" <Thai.Nguyen@auspost.com.au>
To: <ccielab@groupstudy.com>
Sent: Wednesday, October 16, 2002 7:25 PM
Subject: IPSEC and SSL
> Hi all,
>
> I am having troubles with running SSL over an IPSEC tunnel. One of the
> encrypting router keeps complaining errors and Cisco has not been able to
> assist me. Unfortunately I have limited understanding and experience with
> SSL. You please share some thoughts with me
> on this. Many thanks in advance.
>
> Regards,
>
> Thai Nguyen
> CCIE# 10173
> Senior Network Engineer
> Information Technology Delivery
> Australia Post
> Phone: 61 3 9204 5309
> Fax: 61 3 9204 5354
> Mobile: 0407 861 116
>
>
>
>
>
> Australia Post is committed to providing our customers with excellent
service. If we can assist you in any way please either telephone 13 13 18 or
visit our website www.auspost.com.au.
>
> CAUTION
>
> This e-mail and any files transmitted with it are privileged and
confidential information intended for the use of the addressee. The
confidentiality and/or privilege in this e-mail is not waived, lost or
destroyed if it has been transmitted to you in error. If you have received
this e-mail in error you must (a) not disseminate, copy or take any action
in reliance on it; (b) please notify Australia Post immediately by return
e-mail to the sender; and (c) please delete the original e-mail.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3