From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Wed Oct 16 2002 - 23:35:07 GMT-3
no sure map-group can work for svc,
try the other method for the mapping
int atm 4/0
ip addr bla
atm nsap bla
pvc 0/5 qsaal
svc <name> nsap <remote nsap>
protocol ip <remote ip addr>
Donny
"Benny Chong"
<c_benny@hotmail. To: ccielab@groupstudy.com
com> cc:
Sent by: Subject: ATM RFC 2684 svc don't work using full nsap address
nobody@groupstudy
.com
17-10-2002 08:01
Please respond to
"Benny Chong"
Hi,
I just tested the Solie's book RFC 2684 SVC implementation. My problem is,
if I use the esi-address and setup the ILMI pvc, then everything is fine,
but if I use the full nsap-address (and so i delete the ILMI PVC, because i
don't need it to learn the prefix), it won't work. Does anyone have any
idea why? The topology is simple, just 2 router with ATM interface connect
to a ATM switch in between, trying to ping each other.
Below are the working config using esi-address and ilmi PVC, and the
non-working config is just removed the ilmi pvc and esi-address command line
in the bracket and use full nsap-address as shown below. Thanks very much!
Router 1 config:
interface ATM2/0
no ip address
(atm pvc 2 0 16 ilmi)
atm pvc 5 0 5 qsaal
no atm ilmi-keepalive
!
interface ATM2/0.1 multipoint
ip address 100.100.100.1 255.255.255.0
map-group 1
(atm esi-address 131313131313.00) -> atm nsap-address
47.009181000000123412341234.131313131313.00
! (use this
nsap address to replace the esi address, same below)
!
map-list 1
ip 100.100.100.2 atm-nsap 47.009181000000123412341234.141414141414.00
broadcas
Router 2 config:
interface ATM2/0
no ip address
(atm pvc 2 0 16 ilmi)
atm pvc 5 0 5 qsaal
no atm ilmi-keepalive
!
interface ATM2/0.1 multipoint
ip address 100.100.100.2 255.255.255.0
map-group 1
(atm esi-address 141414141414.00) -> atm nsap-address
47.009181000000123412341234.141414141414.00
!
!
map-list 1
ip 100.100.100.1 atm-nsap 47.009181000000123412341234.131313131313.00
broadcas
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:48 GMT-3