From: Rossow, Travis L (RossowTL@corning.com)
Date: Mon Oct 14 2002 - 17:08:51 GMT-3
If the MAC address you want to advertise is on an Ethernet segment, I believe you need to do the conversion (from canonical to non).
If the MAC address you want to advertise is on a Token Ring segment, then you wouldn't need to make the conversion.
TLR
-----Original Message-----
From: Pieter Jordaan [mailto:pieterj@is.co.za]
Sent: Monday, October 14, 2002 1:15 AM
To: 'ccielab@groupstudy.com'
Subject: RE: DLSW and mac addresses
The address you have to use for your icanreach statement must be added in
non-canonical format.
What I would like to know is this, If you are just given a mac address to
use, how would you know which format it's in. IE: the question may state...
Users must be able to reach the following mac aaaa.bbbb.cccc. How will I
know if I have to convert the mac or use it as is.
None of the sample labs I have done to date even hint to the possibility
that I should be converting the mac before I add the ican-reach statement,
TIA
-----Original Message-----
From: Justin Cook [mailto:Justin.Cook@computerland.co.nz]
Sent: 10 October 2002 10:14 PM
To: 'ccielab@groupstudy.com'
Subject: DLSW and mac addresses
I have seen a lot of conflicted labs and posts about mac addresses and DLSW.
Can anyone clarify the following
- DLSW always using noncananical addresses (Tok to Tok, Eth to Eth
and Tok to Eth)? This means if asked to set a icanreach macaddress you
always convert to noncanonical before typing it in?
Thanks in advance
-- Justin Cook"This e-mail may contain confidential information and may be legally privileged and is intended only for the person to whom it is addressed. If you are not the intended recipient, you are notified that you may not use, distribute or copy this document in any manner whatsoever. Kindly also notify the sender immediately by telephone, and delete the e-mail. When addressed to clients of the company from where this e-mail originates ("the sending company ") any opinion or advice contained in this e-mail is subject to the terms and conditions expressed in any applicable terms of business or client engagement letter . The sending company does not accept liability for any damage, loss or expense arising from this e-mail and/or from the accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3