From: Teknoloji Çözümleri (Ümit)
Date: Mon Oct 14 2002 - 08:07:48 GMT-3
if you want to limit rtp for some bwith use rate-limit,
if you want to give a bwith for rtp use ip rtp [priority | reserve ] ...
for limiting each stream to 20kb/s use rsvp;
(config)# ip rsvp bandwith [interface_kbps] [per_flow_kbps]
(config-dialpeer)# req-qos guaranteed-delay ------- for limiting your
rtp stream
hth
umit
-----Original Message-----
From: Mark [mailto:ms6275@yahoo.de]
Sent: Monday, October 14, 2002 13:18
To: ccielab@groupstudy.com
Subject: Test lab QoS question.
I'm supposed to configure an HDLC interface to 400kb/s for rtp which I
think
I have an answer for but I'm supposed to also limit each stream to
20kb/s.
Would this also be possible on a frame-relay link with different
settings
per PVC ?
-----------------------------------------------------------
I do not receive mails sent to GroupStudy. By all means post your
responses
to the Group but CC me in as well or I will not see your reply.
http://web.onetel.net.uk/~6foot6/general.html
-----------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3