From: Krake, Kris (KKrake@aegonusa.com)
Date: Sun Oct 13 2002 - 15:41:36 GMT-3
Configure both routers for frame relay switching and then configure the
serial line joining the two routers with:
Int s0/0
encapsulation frame-relay
frame-relay intf-type nni
If you have to pass PVCs from one frame-relay "switch" to the other you will
have to do a frame-relay route from one switch to the other.
HTH,
Kris
CCIE #10229
-----Original Message-----
From: Karl Brusen [mailto:karl@brusen.com]
Sent: Sunday, October 13, 2002 12:12 PM
To: ccielab
Subject: Two routers Make One Frame Switch
I'm trying to do a lab that requires more frame ports than I have on the
router I use for this purpose. I remember seeing a write-up somewhere about
connecting two routers with some kind of tunnel to make what is effectively
one frame switch. Does anyone know how to do this? Please advise.
Thanks.
Karl Brusen
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3