From: Mingzhou Nie (mnie@yahoo.com)
Date: Sun Oct 13 2002 - 14:42:25 GMT-3
that's a pretty nice diagram and samples. I also noticed that in
Brian's sample config, it only lists one dlci across tunnel. Looking at
my config, it shows you that multiple DLCIs across same tunnel. And the
sample is a working config.
Ming
--- Paul Lalonde <plalonde2@cogeco.ca> wrote:
> Brian Dennis' excellent diagram of Frame Switching using GRE tunnels
> should
> help you do what you want.
>
> Check out Brian's neat config at:
>
> http://www.5g.net/configs/frameswitch.htm
>
> Hope this helps!
> Paul
>
> ----- Original Message -----
> From: "Karl Brusen" <karl@brusen.com>
> To: "ccielab" <ccielab@groupstudy.com>
> Sent: Sunday, October 13, 2002 12:11 PM
> Subject: Two routers Make One Frame Switch
>
>
> > I'm trying to do a lab that requires more frame ports than I have
> on the
> > router I use for this purpose. I remember seeing a write-up
> somewhere
> about
> > connecting two routers with some kind of tunnel to make what is
> effectively
> > one frame switch. Does anyone know how to do this? Please advise.
> >
> > Thanks.
> >
> > Karl Brusen
=====
Mingzhou Nie, CCIE #10342
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:45 GMT-3