From: kym blair (kymblair@hotmail.com)
Date: Sun Oct 13 2002 - 04:05:24 GMT-3
Ester,
Don't trust me on this because I've never touched a 3550, but it seems like
you're doing routing (vice switching), so you may need:
ip route 0.0.0.0 0.0.0.0 148.4.33.1
HTH, Kym
>From: MADMAN <dave@interprise.com>
>Reply-To: MADMAN <dave@interprise.com>
>To: esther <esther1616@hanmail.net>
>CC: ccielab@groupstudy.com
>Subject: Re: default gateway and routing table on 3550
>Date: Fri, 11 Oct 2002 14:41:18 -0500
>
> Does look kinda odd. I'm assuming your using SMI software. Who is
>148.4.33.2?? Send the whole config.
>
> Dave
>
>esther wrote:
> >
> > Hi,
> >
> > I configured the default-gateway and queried the routing table, it seems
> > to be little strange, anyone explain me on it?
> >
> > !
> > interface Vlan50
> > ip address 148.4.33.3 255.255.255.128
> > !
> > ip default-gateway 148.4.33.1
> > ip classless
> > !
> >
> > Cat3550#sh ip route
> > Default gateway is 148.4.33.1
> >
> > Host Gateway Last Use Total Uses Interface
> > 150.100.1.254 148.4.33.2 0:04 8 Vlan50
> > 148.4.6.6 148.4.33.2 0:04 8 Vlan50
> > 148.4.3.3 148.4.33.2 0:04 8 Vlan50
> > 148.4.13.1 148.4.33.2 0:03 68 Vlan50
> > Cat3550#
> >
> > Where and how to show my correct gateway?
> >
> > Thanks,
> >
> > Esther.
> > [TABLE NOT SHOWN]
> >
> > [TABLE NOT SHOWN][TABLE NOT SHOWN][IMAGE]
>
>--
>David Madland
>CCIE# 2016
>Sr. Network Engineer
>Qwest Communications
>612-664-3367
>
>"You don't make the poor richer by making the rich poorer." --Winston
>Churchill
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:45 GMT-3