From: Ronny Jonathan (rjonathan@hotpop.com)
Date: Fri Oct 11 2002 - 10:40:43 GMT-3
Hi Kumar,
I think you can't use vlan-map for this kind of scenario.
If you want the multicast traffic to be sent to other vlan,
you might want to use mvr instead.
regards,
Ronny
----- Original Message -----
From: "Senthil Kumar" <senthil.kumar@intechnology.co.uk>
To: <ccielab@groupstudy.com>
Sent: Friday, October 11, 2002 1:44 AM
Subject: vlan-map
> i want to put a vlan map to drop multicast traffic originating from
node-1
> in vlan 10 to other nodes in vlan10.
> but i want this packet to reach hosts in other vlan, i bridge some and
route
> some..
>
> will the vlan map i apply at the source drop all multicast packets..if so
is
> there an alternate method??
>
> ^&*
>
>
> _____________________________________________________________________
> This message has been checked for all known viruses by the
> CitC Virus Scanning Service powered by SkyLabs. For further information
visit
> http://www.citc.it
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3