From: Joe Cordoba (cordoba@cistron.nl)
Date: Fri Oct 11 2002 - 07:37:21 GMT-3
Does anybody know why does the LS1010 reboots by itself and loses it's
configuration after reboot.
Switch#show version
Cisco Internetwork Operating System Software
IOS (tm) LS1010 WA4-5 Software (LS1010-WP-M), Version 12.0(7)W5(15c)
RELEASE SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 06-May-00 04:03 by
Image text-base: 0x60010930, data-base: 0x60A6A000
ROM: System Bootstrap, Version 11.2(1.4.WA3.0) [integ 1.4.WA3.0],
RELEASE SOFTWARE
Switch uptime is 1 hour, 56 minutes
System restarted by error - a Software forced crash, PC 0x600B3A60
System image file is "bootflash:ls1010-wp-mz.120-7.W5.15c.bin"
cisco LS1010 (R4600) processor with 65536K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0
Last reset from power-on
1 Ethernet/IEEE 802.3 interface(s)
5 ATM network interface(s)
123K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Best regards,
Joe Cordoba
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3