From: Brian Dennis (brian@5g.net)
Date: Wed Oct 09 2002 - 14:24:15 GMT-3
If you look in the Cisco Documentation CD you will see that the standard
"ip split-horizon" command is only documented under the RIP and IGRP
sections. EIGRP has its own IP split-horizon command "ip split-horizon
eigrp".
The "show ip interface" command is only showing if IP split horizon is
enabled or disabled for RIP and IGRP. The command doesn't show if EIGRP
split horizon is disabled.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Bruce Williams
Sent: Wednesday, October 09, 2002 9:42 AM
To: Ccielab@Groupstudy. Com
Subject: Clarification Please on EIGRP Split Horizon FrameRelay Physical
Int
I need some clarification please. I have read that split horizon is
automatically disabled for RIP, IGRP and EIGRP on physical frame relay
interfaces. However, I read on this list that this does not apply for
EIGRP.
Is EIGRP immune to this. Does Split Horizon remain enabled on physical
framerelay interfaces for EIGRP even though a "sho ip int" says the
split
horizon is disabled?
Bruce
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:43 GMT-3