From: Dave Stoddard (dave@stoddard.net)
Date: Tue Oct 08 2002 - 23:09:23 GMT-3
That is correct.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Nathan Chessin
Sent: Tuesday, October 08, 2002 6:00 PM
To: 'enginedrive2002'; ccielab@groupstudy.com
Subject: RE: Split Horizon??
I believe (ie I am not sure) that you have to manually disable split horizon
on EIGRP with the no ip split-horiz eigrp # command.
can anyone verify this?
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1828/products_conf
iguration_guide_chapter09186a00800ca56e.html#xtocid14
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> enginedrive2002
> Sent: Tuesday, October 08, 2002 5:14 PM
> To: ccielab@groupstudy.com
> Subject: Re: Split Horizon??
>
>
> As far as I know, once you enter 'encap frame' command,
> split-horizon is
> disable on that interface by default.
>
> E.D.
>
> ----- Original Message -----
> From: "D. Lee" <dongweylee1@attbi.com>
> To: <ccielab@groupstudy.com>
> Sent: October 8, 2002 2:41 PM
> Subject: Help: Split Horizon??
>
>
> > R1 is the Hub of Frame-Relay network, and R2, R3 are the
> spoke routers.
> > They all use physical interfaces connect to each other, and
> have EIGRP
> running
> > in between.
> >
> > I use "sho ip interface serial x" command to check if split
> horizon is
> enabled
> > or disabled for any particular interface.
> >
> > If one of them said enabled and I have to disable it (for
> some reason),
> then I
> > enter "no ip split-horizon eigrp ##" under that interface.
> I do "sho ip
> > interface serial x", and it still said enabled and nothing changed.
> >
> > If one of them said disabled and I have to enable it (for
> some reason),
> then I
> > enter "ip split-horizon eigrp ##" under that interface. I do "sho ip
> interface
> > serial x", and it still said disabled and nothing changed.
> >
> > Is it supposed to work this way?? How do I know if
> something is really
> > enabled/disabled?? Did I use the wrong command??
> >
> > Thanks for any feedback.
>
> ______________________________________________________________
> ________
> Post your free ad now! http://personals.yahoo.ca
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:43 GMT-3