From: Todd.Reagan@nokia.com
Date: Tue Oct 08 2002 - 17:36:28 GMT-3
Check your software version on the 3550, the aging command is in the
3550 with 12.1(9)EA1c that I have.
I also know IOS 12.1(11)EA1 is out for the 3550 which fixes a big
spanning-tree problem...
Todd
-----Original Message-----
From: ext Peter Whittle [mailto:peter@whittle-systems.demon.co.uk]
Sent: 08 October, 2002 15:09
To: CCIELab Studygroup
Subject: CAT 3550 port security aging??
One of the popular commercial lab scenarios has a section on CAT3550.
It requires you to implement port-security tied to a particular NIC
card.
No problem
"int fa0/1
switchport port-security
switchport port-security mac-address 0002.abcd.ef10
"
I hear you say.
However, it goes on to require you to allow a new NIC to connect after
xxx if it has not heard from the original NIC. ie to age out the port-
security mac address.
The solution suggests that there is a 'switchport port-security aging
time xxxx' command. However, on the 3550 that I tried it on there is no
such command!
Nor is it documented on the March 2002 CD under the CAT3550.
There is such an option for a CAT2924XL with recent firmware.
Any Ideas?
Thanks
Peter
-- Peter Whittle
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3