From: Justin Cook (Justin.Cook@computerland.co.nz)
Date: Tue Oct 08 2002 - 17:01:50 GMT-3
That is why you connect to the switch, and do it from there as I mentioned
there are some blocks but ways around them
-- Justin Cook Systems Consultant MCSE +I, CCDP, CCNP(Security, Voice) Computerland Wellington DDI: 04 4606000 Cellphone: 021 2408689 Email: Justin.Cook@Computerland.co.nz <mailto:Justin.Cook@Computerland.co.nz <mailto:Justin.Cook@Computerland.co.nz> > CAUTION: This e-mail message and accompanying data may contain Information that is confidential and subject to privilege. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this e-mail in error, please notify me immediately and delete all material pertaining to this e-mail. Thank you. -----Original Message----- From: Larson, Chris [mailto:CLarson@usaid.gov] Sent: Wednesday, 9 October 2002 12:57 a.m. To: 'C. Warren'; 'Justin Cook'; 'esther'; ccielab@groupstudy.com Subject: RE: how to detect hidden ipx number I think what you need to do is to build subinterfaces with a different IPX encapsulation on each one. Give each on an IPX network number and place them all in rip. Debug, the router should complain. No, CDP will not work. If you are connectwed to a switch all CDP is gonna give you is the swich info, not neighboring routers. -----Original Message----- From: C. Warren [SMTP:chwarren@cox.net] Sent: Monday, October 07, 2002 7:40 PM To: 'Justin Cook'; 'esther'; ccielab@groupstudy.com Subject: RE: how to detect hidden ipx number What if cdp isn't enabled? > -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com <mailto:nobody@groupstudy.com> ] On > Behalf Of Justin Cook > Sent: Monday, October 07, 2002 4:17 PM > To: 'esther'; ccielab@groupstudy.com > Subject: RE: how to detect hidden ipx number > > > Wouldn't cdp give you this information as well? > > > Did a test a managed to get the ipx network number of the > directly attached device > > Warrented there are a few blocks but it seems to work ok > > -- > Justin Cook > > > -----Original Message----- > From: esther [mailto:esther1616@hanmail.net <mailto:esther1616@hanmail.net> ] > Sent: Saturday, 5 October 2002 8:44 p.m. > To: ccielab@groupstudy.com > Subject: how to detect hidden ipx number > > Hi all, > > To detect a hidden ipx number, I did the following step. > > R1 --- (ipx ?)----- (Ethernet) -----(ipx 200) -- R2 > > R1# > R1#debug ipx packet > IPX packet debugging is on > R1# > R1#conf t > Enter configuration commands, one per line. End with CNTL/Z. > R1(config)#int e0 R1(config-if)#ipx network 10 .... assigned > a discretionary ipx no. 10 R1(config-if)# R1(config-if)# > > No debugging messages are appeared, I expected mismatch ipx > network number. Anyone help me how to detect the hidden ipx > network number? > > Thanks in advance, > > Esther. > [TABLE NOT SHOWN] > > [TABLE NOT SHOWN][TABLE NOT SHOWN][IMAGE]
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3