From: mdye@bevillcntr.org
Date: Tue Oct 08 2002 - 03:15:40 GMT-3
And don't forget "copy run start".
At 11:03 PM 10/7/02 -0700, Leo Seto wrote:
>Lawyers? Charge those guys $300/hr. : )
>
>do what while running? change the config register?
>
>config t
>config-register 0xXXXX
>
>
>
>
>On Mon, 7 Oct 2002, George E Lampro Super Genius wrote:
>
>> Guys,
>> Thanks for the quick response on this.
>>
>>
>> I think the resister is 0x2142 I can force the image to load by typing
i to
>> initialize
>> but it doesn't default to the startup config.
>>
>> I'll try the 0x2101
>>
>> anyone know how to do this while the router is running. It supports our
>> internet connection for 700+ lawyers adn staff.
>>
>>
>> GL
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> Jay Hennigan
>> Sent: Monday, October 07, 2002 10:58 PM
>> To: George E Lampro Super Genius
>> Cc: 'ccielab'
>> Subject: Re: password recovery problem
>>
>>
>> On Mon, 7 Oct 2002, George E Lampro Super Genius wrote:
>>
>> > password recovery problem
>> >
>> >
>> > Okay friends,
>> >
>> > I've performed password recovery on a 2621 router and it continues to
boot
>> > in to Rom monitor mode.
>> >
>> > Does anyone know what config register command will correct this??
>>
>> 0x2102 should do the trick, if the IOS image is valid. Watch the startup
>> messages, you might have other problems.
>>
>> --
>> Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
>> NetLojix Communications, Inc. - http://www.netlojix.com/
>> WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3