From: Brandon J Carroll (bcarroll@brandonjcarroll.com)
Date: Sun Sep 08 2002 - 03:01:45 GMT-3
Hate to beat a dead horse but here goes. You mention that you want to do
this while it is running.... global config, and config-register 0x2102.
That should take care of it.
Regards,
BC
----- Original Message -----
From: "George E Lampro Super Genius" <glampron@machinelogic.com>
To: "'Jay Hennigan'" <jay@west.net>
Cc: "'ccielab'" <ccielab@groupstudy.com>
Sent: Monday, October 07, 2002 10:16 PM
Subject: RE: password recovery problem
> Guys,
> Thanks for the quick response on this.
>
>
> I think the resister is 0x2142 I can force the image to load by typing i
to
> initialize
> but it doesn't default to the startup config.
>
> I'll try the 0x2101
>
> anyone know how to do this while the router is running. It supports our
> internet connection for 700+ lawyers adn staff.
>
>
> GL
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jay Hennigan
> Sent: Monday, October 07, 2002 10:58 PM
> To: George E Lampro Super Genius
> Cc: 'ccielab'
> Subject: Re: password recovery problem
>
>
> On Mon, 7 Oct 2002, George E Lampro Super Genius wrote:
>
> > password recovery problem
> >
> >
> > Okay friends,
> >
> > I've performed password recovery on a 2621 router and it continues to
boot
> > in to Rom monitor mode.
> >
> > Does anyone know what config register command will correct this??
>
> 0x2102 should do the trick, if the IOS image is valid. Watch the startup
> messages, you might have other problems.
>
> --
> Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
> NetLojix Communications, Inc. - http://www.netlojix.com/
> WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3