From: Sam.MicroGate@usa.telekom.de
Date: Mon Oct 07 2002 - 11:58:11 GMT-3
Hello,
Try to telnet to the attached routers by using the port number. For example,
if you have R1 in port 1 and R2 in port 2, you would use telnet 1.1.1.1 2001
for R1 and telnet 1.1.1.1 2002. Assuming that the reserve telnet ip address
is 1.1.1.1. This way you can go up to 16 telnet sessions. Hope this would
help.
Sam
-----Original Message-----
From: Nate Kleven [mailto:cciemail@intellinet.ws]
Sent: Saturday, October 05, 2002 1:17 PM
To: ccielab@groupstudy.com
Subject: 2511 Terminal Server: Max Connections
Is there any way to get passed the 5 simultaneous VTY connection limit on
the 2511? When I try to go beyond 4 in the "LINE VTY 0 4" command, it
doesn't work. I want to be able to get into more than 5 routers at once.
I'm pretty sure the answer to my question is no, but I wanted to check
anyway. I can always just start disconnecting and reconnecting I suppose.
__________
Nate Kleven
Senior Network Engineer, CCNP Voice Access, MCSE
Expanets
6020 So 190th ST
Kent, WA 98032
(206)219.6135
"Experienced at Networked Solutions"
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3