From: Balaji Siva (bsivasub@cisco.com)
Date: Sun Oct 06 2002 - 16:56:11 GMT-3
Traffic is sent untagged on native on 802.1q by default .. but you can tag
them with the command
w2-6.13-c3550(24)-a(config)#vlan dot1q tag native ?
<cr>
Only ISL has all vlans tagged by default.
B
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chris
Sent: Sunday, October 06, 2002 3:13 PM
To: P729; chenyan; ccielab
Subject: Re: 802.1q native vlan
I have been looking through the Docs and indeed it does say that native
vlan traffic is not tagged. I guess I have missed that when reading the
switching docs previously, and was always taught that all traffic is tagged.
Thanks for the clarification.
This would also mean that it is restricted to the native vlan then right?
Without a tag it could not be forwarded to any other vlan.
----- Original Message -----
From: "P729" <p729@cox.net>
To: "Chris" <clarson52@comcast.net>; "chenyan" <chenyan@deeptht.com.cn>;
"ccielab" <ccielab@groupstudy.com>
Sent: Sunday, October 06, 2002 2:05 PM
Subject: Re: 802.1q native vlan
> "Any untagged frames will get tagged..."
>
> Mmmm...sounds kinda contradictory doesn't it? Actually, frames assigned to
> the native VLAN of the trunk are sent untagged across the trunk, period.
But
> one might ask, "how would the switches on each end know when there's a
> native VLAN mismatch?" The answer for Cisco switches is through CDP. If
CDP
> is disabled or not available, then they wouldn't know and you can pretty
> much bridge the two VLANs together and maybe not know it...
>
> Regards,
>
> Mas Kato
> https://ecardfile.com/id/mkato
> ----- Original Message -----
> From: "Chris" <clarson52@comcast.net>
> To: "chenyan" <chenyan@deeptht.com.cn>; "ccielab" <ccielab@groupstudy.com>
> Sent: Sunday, October 06, 2002 9:48 AM
> Subject: Re: 802.1q native vlan
>
>
> Any untagged frames will get tagged to the native vlan and travel the
native
> vlan.
>
>
> ----- Original Message -----
> From: "chenyan" <chenyan@deeptht.com.cn>
> To: "ccielab" <ccielab@groupstudy.com>
> Sent: Sunday, October 06, 2002 11:13 AM
> Subject: 802.1q native vlan
>
>
> > hi,guys
> >
> > I want to know why there is native vlan for 802.1q and what is that for?
> >
> > Thanks
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:40 GMT-3