Re: set port name = description in 3550?

From: Troy Rader (troy@onenet.net)
Date: Sat Oct 05 2002 - 23:51:57 GMT-3

• Next message: Kris Keen: "cisco 4700m boot issues"
• Previous message: Nate Kleven: "Lab Date Needed: SJ December 1st - 24th"
• Maybe in reply to: ying c: "set port name = description in 3550?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Correct.

r8#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r8(config)#int fast0/1
r8(config-if)#desc Testing Description on 3550
r8(config-if)#end
r8#sh run int fast0/1
Building configuration...

Current configuration : 89 bytes
!
interface FastEthernet0/1
 description Testing Description on 3550
 no ip address
end

r8#

ying c wrote:

>Hi all,
>
>Just want to be sure. Is the 'description' at
>interface command is what we use to set 3550 port
>name?
>
>Thanks,
>Chang
>
>__________________________________________________
>Do you Yahoo!?
>Faith Hill - Exclusive Performances, Videos & More
>http://faith.yahoo.com

• Next message: Kris Keen: "cisco 4700m boot issues"
• Previous message: Nate Kleven: "Lab Date Needed: SJ December 1st - 24th"
• Maybe in reply to: ying c: "set port name = description in 3550?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:40 GMT-3