From: Dave Stoddard (dstoddard@thrupoint.net)
Date: Fri Oct 04 2002 - 19:35:50 GMT-3
I believe the command syntax is or "write net tftp-ip-address:\filename" or
"write net tftp-ip-address:/filename", i.e. wr net 10.10.10.1:/pix-confg
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
George Zhang
Sent: Friday, October 04, 2002 2:59 PM
To: ccielab@groupstudy.com
Subject: PIX TFTP Server
Hi,
I have a problem regarding writing PIX firewall configuration file to a tftp
server.
My configuration is below:
1. TFTP server is configured on a PC on a switch connected to the inside
interface
of the firewall. It's IP address is 172.16.1.10
2. I configure "tftp-server 172.16.1.10 C:\TFTP-Root" on my PIX. I have
C:\TFTP-Root
on the PC. That's is the default directory for TFTP.
3. I can ping my TFTP server(172.16.1.10) from my PIX.
Note, I could copy running to tfp from the L3 module of my switch
successfully.
However, when I try to do "write net :pix" on the PIX, I got the following
message:
TFTP write 'C:\TFTP-Root/pix' at 172.18.1.10 on interface 1
TFTP Server Error: Invalid access to C:\TFTP-Root/pix
Could someone tell me what I am doing wrong?
Thanks.
George Zhang
CCIE#8903
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:39 GMT-3