From: Phil (ciscostudent1@yahoo.com.br)
Date: Fri Oct 04 2002 - 10:39:41 GMT-3
According to CCIE Power Session you should expect to be connected to a terminal server via telnet or serial port, it differs among the facilities. The option you suggested would work if you telnet to the terminal server, but if you're connected via serial port it won't work.
Phil
Weidong Xiao wrote:Hello,
I don't think that is the case. I haven't been in a lab, if I'm wrong, CCIEs, please correct me.
In a CCIE lab, you work on a workstation which links to a terminal router. The terminal router's async interface connetcts to all the other Cisco kits' console ports. You telnet to the terminal router first, and from there, you reverse telnet to any Cisco kit. So, why do you use Hyper-terminal? Even DOS command line is better.
Cheers,
Weidong
NP,DP,CCS1
>
> I am trying to use hyper terminal. It seems this
> terminal is not so friendly for router configuration.
> The window is small. If the display goes out the
> window, it gets messed.
> This is very inconvinient especially when I want to
> check the configuration file, some portion at the
> begining gets messed up.
> Doesanyone has similar experience? Is there a
> workaround for this.
>
> Thank you.
>
> Guoqi
>
>
>
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com
---------------------------------
Yahoo! GeoCities
Tudo para criar o seu site: ferramentas faceis de usar, espago de sobra e acesssrios.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:39 GMT-3