From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@NA2.US.ML.com)
Date: Thu Oct 03 2002 - 14:44:28 GMT-3
PPP does not require authentication. You are required, however, to configure
dial strings somewhere. In your configuration, what numbers are being dialed
to reach the remote BRI?
John
> -----Original Message-----
> From: Sean C [SMTP:Upp_and_Upp@hotmail.com]
> Sent: Thursday, October 03, 2002 1:11 PM
> To: Adam Crisp; Ccielab
> Subject: Re: ISDN DIAL
>
> PPP requires authentication - either CHAP or PAP
> ----- Original Message -----
> From: "Adam Crisp" <adam.crisp@totalise.co.uk>
> To: "Ccielab" <ccielab@groupstudy.com>
> Sent: Thursday, October 03, 2002 7:28 AM
> Subject: ISDN DIAL
>
>
> > Hi,
> >
> > Can anybody spot why these routers won't dial eachother.
> > (they dial ok, but connection is rejected at L3 by remote router)
> >
> > Switch type is Basic-net3, so no need for SPID's
> >
> > Adam
> >
> >
> > !Router1
> > !
> > isdn switch-type basic-net3
> > !
> > int Bri0/0
> > bandwidth 64
> > ip address 192.168.200.1 255.255.255.252
> > encapsulation ppp
> > dialer map ip 192.168.200.2 222 broadcast
> > dialer-group 1
> > isdn switch-type basic-net3
> > dialer idle-timeout 30
> > !
> > dialer-list 1 protocol ip permit
> > end
> > !
> > !Router2
> > !
> > isdn switch-type basic-net3
> > !
> > int Bri0/0
> > bandwidth 64
> > ip address 192.168.200.2 255.255.255.252
> > encapsulation ppp
> > dialer map ip 192.168.200.1 111 broadcast
> > dialer-group 1
> > isdn switch-type basic-net3
> > dialer idle-timeout 30
> > !
> > dialer-list 1 protocol ip permit
> > !
> > end
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3