Re: ISDN DIAL

From: Joseph Kimmer (jkimmer@cisco.com)
Date: Thu Oct 03 2002 - 09:41:55 GMT-3

Next message: Denise Donohue: "Re: !! Important - Please Read !!"
Previous message: Nordhoff, Michael G. (US - Hermitage): "test - please delete"
Maybe in reply to: Adam Crisp: "ISDN DIAL"
Next in thread: Ayman Hamza: "Re: ISDN DIAL"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

you are missing your dn's on your dialer map's...

At 12:28 PM 10/3/2002 +0100, Adam Crisp wrote:
>Hi,
>
>Can anybody spot why these routers won't dial eachother.
>(they dial ok, but connection is rejected at L3 by remote router)
>
>Switch type is Basic-net3, so no need for SPID's
>
>Adam
>
>
>!Router1
>!
>isdn switch-type basic-net3
>!
>int Bri0/0
>bandwidth 64
>ip address 192.168.200.1 255.255.255.252
>encapsulation ppp
>dialer map ip 192.168.200.2 222 broadcast
>dialer-group 1
>isdn switch-type basic-net3
>dialer idle-timeout 30
>!
>dialer-list 1 protocol ip permit
>end
>!
>!Router2
>!
>isdn switch-type basic-net3
>!
>int Bri0/0
>bandwidth 64
>ip address 192.168.200.2 255.255.255.252
>encapsulation ppp
>dialer map ip 192.168.200.1 111 broadcast
>dialer-group 1
>isdn switch-type basic-net3
>dialer idle-timeout 30
>!
>dialer-list 1 protocol ip permit
>!
>end

Joseph C. Kimmer
Systems Engineer
Cisco Systems, Inc.
8735 W. Higgins Rd., Suite 300
Chicago, IL 60631
Direct Line: (773) 695-8264
Fax: (773) 695-8099
Email: jkimmer@cisco.com
WWW: http://www.cisco.com

Next message: Denise Donohue: "Re: !! Important - Please Read !!"
Previous message: Nordhoff, Michael G. (US - Hermitage): "test - please delete"
Maybe in reply to: Adam Crisp: "ISDN DIAL"
Next in thread: Ayman Hamza: "Re: ISDN DIAL"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3