VPN client to 2500 - "crypto isakmp client configuration..."

From: Jay Hennigan (jay@west.net)
Date: Wed Oct 02 2002 - 13:14:21 GMT-3

• Next message: Carl Willias: "SNMP MIB PROBLEM"
• Previous message: Dane: "Lab Equipment For Sell"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm trying to play with Cisco VPN client to a 2500 and having issues
with the VPN group. Cisco's documentation shows a setup for a 2611
where the command

    crypto isakmp client configuration group 3000client

is specified. This opens a subset of commands where one specifies the
key, pool, etc. for that group. See:

http://www.cisco.com/warp/public/707/ios_usr_rad.html

The 2500 I'm using doesn't allow this command. The only option for

   crypto isakmp client configuration

is "address-pool".

Any clues as to how to soecify a client group here to allow a VPN between
a Cisco 3000 client and a 2500 with RADIUS? IOS is c2500-ik8s-l.122-12.bin.

I've tried other versions of IOS as well with no joy.

-- 
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
NetLojix Communications, Inc.  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323

• Next message: Carl Willias: "SNMP MIB PROBLEM"
• Previous message: Dane: "Lab Equipment For Sell"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:37 GMT-3