From: Erick B. (erickbe@yahoo.com)
Date: Wed Oct 02 2002 - 08:15:16 GMT-3
Hi,
It looks like that port is in multi-vlan mode. I'd
default the port, or remove the multivlan commands and
then you should be able to do a trunk with no
problems.
Erick
--- kpalmer <kip.palmer@verizon.net> wrote:
> Jiminy Christmas,.... I'm about to flip.
>
> DOES ANYBODY, no the final verdict on the
> WS-C2916M-XL?
> Can it perform any kind of trunking to a,..
> WS-C3524-XL?
>
> Is there a CCO scratching anywhere on the
> configuration of
> this limited (4mg) mem switch?
>
> It seems to me that I had it trunked before (1yr
> ago) to a WS-C2929M-XL,
> but no can do now!
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "flash:c2900XL-hs-mz-112.8.6-SA6.bin" <-- Latest and
> last image
>
> cisco WS-C2916M-XL (PowerPC403GA) processor
> (revision 0x11) with
> 4096K/640K bytes of memory.
> Processor board ID 0x06, with hardware revision 0x00
> Processor is running Enterprise Edition Software
> Cluster member switch capable
> 16 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of flash-simulated non-volatile
> configuration memory.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> sw14_cat2916# show interface fastethernet 0/16
> switchport
>
> Name: Fa0/16
> Operational Mode: multi
> Administrative Trunking Encapsulation: isl
> Operational Trunking Encapsulation: isl
> Negotiation of Trunking: Disabled
> Access Mode VLAN: 0 ((Inactive))
> Trunking Native Mode VLAN: 1 (default)
> Trunking VLANs Enabled: NONE
> Pruning VLANs Enabled: NONE
>
>
> sw14_cat2916(config)#spanning-tree protocol ?
> dec Digital spanning-tree protocol
> ibm IBM spanning-tree protocol
> ieee IEEE Ethernet spanning-tree protocol
>
>
> HELP!!
>
>
> KPalmer
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:37 GMT-3