From: MADMAN (dave@interprise.com)
Date: Tue Oct 01 2002 - 18:27:44 GMT-3
Yes you are correct Sir!! I forgotten about that, thanks for the
clarification.
Dave
"Bouchard, Louis" wrote:
>
> Due to new software SARring code, it now supports ATM without the
> need of an AIM module (AAL2/5). You juste need another one and you
> can do back to back ATM with a T1 Xover.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
> limit/122x/122xb/122xb_2/ft_t1atm.htm
>
> -----Original Message-----
> From: BIGB97750@aol.com [mailto:BIGB97750@aol.com]
> Sent: Monday, September 30, 2002 5:06 PM
> To: ccielab@groupstudy.com
> Subject: ATM with VWIC-2MFT-T1
>
> Greetings,
>
> Can anyone point me to any documentation that can show me how to set up ATM
> pvc using 2MFT-T1? I not quite sure if I have the right info.
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3