From: Pieter Jordaan (pieterj@is.co.za)
Date: Mon Sep 30 2002 - 07:44:39 GMT-3
Hi group
I was wondering if any of you could answer this question.
I have noticed on the 2924 and 2950 switches that when I shut an interface,
the router attached don't go into a down/down state. The link stays up.
This could be a potential problem if you want to test for example, your
backup interface command by shutting the port on the switch because the
router interface doesn't go down.
Does this also happen on the 3550 and if so, how would you test things in
the lab if shutting down the switch interface doesn't shut/kill the link
like on the cat5k
TIA
"This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:07 GMT-3