From: Prashanth (prashanthcm@yahoo.com)
Date: Sat Sep 28 2002 - 17:31:13 GMT-3
just advertizing the
151.1.0.0 in RIP doesnt work? it should be simple as
that... its working in my setup...
prashanth
--- Robert Massiache <robert2140@hotmail.com> wrote:
> Hi all,
> I got a questins for you all. Here the R2 is an
> unkown router running RIP.
> No idea about what version. You need to receive the
> rotues from R2.
>
>
> loop20-R1----Ethernet----R2
>
> R1:
>
> interface loop 20
> 131.1.100.1 255.255.255.0
>
> interface Ethernet0
> ip address 151.1.100.1 255.255.255.0
>
> router rip
> redistribute connected metric 2 route-map west
> network 131.1.0.0
>
> route-map west permit 10
> match interface e0
>
> route-map west permit 20
> !
> end.
>
>
> How can I configure R1 to receive those R2 routes. I
> should only advertise
> the loop 20 I should not advt. the Ethernet.
>
> In all the above trials the RIP is not getting
> enabled on the Ethernet even
> if I use access-list option insdie the route-map.
> Any help would be
> appreciated.
>
>
> thanks
>
>
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:06 GMT-3