Help on pruning

From: Raj Thava[IPC_Head Office] (traj@ipcc.ca)
Date: Thu Sep 26 2002 - 23:58:44 GMT-3

• Next message: Song Mu: "%PVC already assigned to interface Serial0"
• Previous message: Chris: "Re: BGP - Peering"
• Next in thread: John Mistichelli: "Re: Help on pruning"
• Maybe reply: John Mistichelli: "Re: Help on pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi

I have configured a trunk on Cat3550 and enable pruning on that interface,
by default all VLan's are in prunning and I am allowing
VLan 3 & 4 through the trunk so on the pruning enabled list I have to leave
only these two Vlan's or I have to remove only these two vlan's.

Here is the show int output

Switch#show interfaces fast 0/16 switchport
Name: Fa0/16
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: down
Administrative Trunking Encapsulation: isl
Negotiation of Trunking: Off
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: 1,3,4,1002-1005
Pruning VLANs Enabled: 2-1001

Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled

• Next message: Song Mu: "%PVC already assigned to interface Serial0"
• Previous message: Chris: "Re: BGP - Peering"
• Next in thread: John Mistichelli: "Re: Help on pruning"
• Maybe reply: John Mistichelli: "Re: Help on pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:04 GMT-3