From: Tu Nguyen (tunguyen@juniper.net)
Date: Wed Sep 25 2002 - 14:43:57 GMT-3
Hi,
Have any seen this before? Upon inserting the csim star command, the router got reboot!!
Thanks,
Tu
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0x80008088, data-base: 0x80C524F8
cisco 2621 (MPC860) processor (revision 0x102) with 53248K/12288K bytes of memory.
Processor board ID JAB04130735 (3364644779)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
---------------------------------------------------------
R1#csim star 3159
csim: called number = 3159, loop count =
*** System received a SegV exception ***
signal= 0xb, code= 0x1100, context= 0x81321d28
PC = 0x0, Vector = 0x1100, SP = 0x8166df00
*** Unexpected Console tx-ready interrupt ***
PC = 0xfff03fc4, Vector = 0x500, SP = 0x81322f34
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x6fdb4c
Self decompressing the image : #######################################################################################################################################
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3