From: Don (seadon@attbi.com)
Date: Sun Sep 22 2002 - 14:37:16 GMT-3
Put the flash simm in the 2501 and load the image there. Then put it back
in the 2502.
Don
----- Original Message -----
From: "CCIE Prep" <cciemail@intellinet.ws>
To: <ccielab@groupstudy.com>
Sent: Saturday, September 21, 2002 10:50 PM
Subject: Upgrading Cisco 25XX flash
> Does anyone know if there is a way to upgrade Cisco 2500 series routers
via
> a serial interface? I have a couple 2502's (no ethernet) that I want to
> upgrade via a TFTP server. I have connected them via a serial frame-relay
> connection to a 2501. The 2501 is connected to the subnet with the TFTP
> server. I can see the TFTP server from the 2502 initially. However,
after
> issuing the "COPY TFTP FLASH" command, the 2502 reboots and looses
> connectivity back to the TFTP server, making it impossible to load the new
> flash. Has anyone done this successfully?
> __________
>
> Nate Kleven
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:59 GMT-3