From: Voss, David (dvoss@heidrick.com)
Date: Sun Sep 22 2002 - 12:40:00 GMT-3
For DLSW to work over ISDN, you must configure the following:
R1
dlsw local-peer peer-id 150.1.1.1 keepalive 0
dlsw remote-peer 0 tcp 150.1.2.2 timeout 300
R2
dlsw local-peer peer-id 150.1.2.2 keepalive 0
dlsw remote-peer 0 tcp 150.1.1.1 timeout 300
Because DLSw keepalives and data are passed on the same port tcp 2065 we
cannot filter keepalives without tearing down the circuit. The commands
above will show that the circuit is in a CONNECTED state without the
requirement of keepalives.
-----Original Message-----
From: Svuillaume8@aol.com [mailto:Svuillaume8@aol.com]
Sent: Saturday, September 21, 2002 1:42 PM
To: ccielab@groupstudy.com
Subject: DLSW and backup over ISDN
Hi,
What must i do when i want to configure a backup dlsw over isdn??
1) dlsw remote-peer 0 tcp add dynamic
Or
2) dlsw local-peer peer-id add keealive 0
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:59 GMT-3