From: Chris Johnston (chris@routerguy.com)
Date: Sun Sep 22 2002 - 03:51:16 GMT-3
Sorry, Nate. The 2500 series is run from flash. So it requires a reboot to
get it to start the download. If you watch the console port carefully, it
will come up and try to start the frame interface then start the download.
However, the 50 seconds or so for the LMI to sync up is more than the
timeout on tftp so it will fail.
So - best bet (er, only way to go) is LAN tftp.
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
CCIE Prep
Sent: Saturday, September 21, 2002 10:50 PM
To: 'ccielab@groupstudy.com'
Subject: Upgrading Cisco 25XX flash
Does anyone know if there is a way to upgrade Cisco 2500 series routers via
a serial interface? I have a couple 2502's (no ethernet) that I want to
upgrade via a TFTP server. I have connected them via a serial frame-relay
connection to a 2501. The 2501 is connected to the subnet with the TFTP
server. I can see the TFTP server from the 2502 initially. However, after
issuing the "COPY TFTP FLASH" command, the 2502 reboots and looses
connectivity back to the TFTP server, making it impossible to load the new
flash. Has anyone done this successfully?
__________
Nate Kleven
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:59 GMT-3