From: Imo Etuk (ietuk@comcast.net)
Date: Sat Sep 21 2002 - 11:15:42 GMT-3
yes that is the highest hog of the cpu
Warning : The information contained in this message may be privileged and
confidential and protected from disclosure. If the reader of this message is
not the intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited. If you
have received this communication in error, please notify the sender
immediately by replying to this message and then delete it from your
computer.
-----Original Message-----
From: elping [mailto:elpingu@acedsl.com]
Sent: Thursday, September 19, 2002 8:13 PM
To: Imo Etuk
Cc: Chuck Church; ccielab@groupstudy.com
Subject: Re: NAt oh NAT
is that the highest hog of cpu when you do a "sh proc cpu" ?
Imo Etuk wrote:
> Chuck,
>
> MSFC II
> CEF is enabled - don't know why the CPU utilization is so high. CPU
>
> PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
> 53 36467656 24301656 1500 4.48% 3.95% 3.06% 0 IP Input
> 13 2666024 1789255 1490 1.04% 1.76% 1.52% 0 ARP Input
> 63 726712 228837 3175 0.57% 0.34% 0.36% 0 CEF process
> 41 188244 5137910 36 0.24% 0.10% 0.11% 0 IP NAT Ager
>
> Funny enough, IP Nat is running only at 0.36%, the IP input seems like a
> winner at 3.06%
>
> Thanks,
>
> Imo
>
> Warning : The information contained in this message may be privileged and
> confidential and protected from disclosure. If the reader of this message
is
> not the intended recipient, you are hereby notified that any
dissemination,
> distribution or copying of this communication is strictly prohibited. If
you
> have received this communication in error, please notify the sender
> immediately by replying to this message and then delete it from your
> computer.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Chuck Church
> Sent: Friday, September 20, 2002 3:56 PM
> To: 'IMO ETUK'; 'ccielab@groupstudy.com'
> Subject: RE: NAt oh NAT
>
> Imo,
>
> What version are you running on the MSFC? Is it an MSFC 1 or 2?
Is
> CEF enabled and running correctly? I though NAT could be fast switched.
> What does your 'sh proc cpu' show as the offending process? Or is it
> interrupts?
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
> Sr. Network Engineer
> Magnacom Technologies
> 140 N. Rt. 303
> Valley Cottage, NY 10989
> 845-267-4000
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> IMO ETUK
> Sent: Friday, September 20, 2002 4:40 PM
> To: ccielab@groupstudy.com
> Subject: NAt oh NAT
>
> Hi all,
>
> I seem to be having problems with a NAT config. Currently NAT is
> configured on a 6506 which is running native IOS. I have 4,000 users
> natted to 13 IPs and my processor utilization is not too happy about
> this, its sitting at 80& util now.
>
> I have tried tweaking timers and such on NAT but no dice. Is there any
> thing else that i can do to aleviate the cpu utilization?
>
> Here are my timers
>
> ip nat translation timeout 180
> ip nat translation tcp-timeout 300
> ip nat translation udp-timeout 30
> ip nat translation finrst-timeout 15
> ip nat translation dns-timeout 15
>
> ------------
>
> Here is my NAT config - some of it
>
> ip nat pool nat_router xx.xx.xx.11 xx.xx.xx.23 prefix-length 26
> ip nat inside source list 99 pool nat_router overload
> access-list 99 permit a.b.0.0 0.0.255.255
>
> where a and b are private IPs :)
> the xx.xx are publics :)
>
> So i have 13 VLANs going to the pool nat_router.
>
> Any thoughts?
>
> Thanks
>
> Imo
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:59 GMT-3