From: Fred Ingham (fingham@cox.net)
Date: Fri Sep 20 2002 - 22:26:40 GMT-3
Yes. If the Ethernet device address is 0000.1000.1234 then you would use
either dest-mac 0000.0800.482c or dmac-output-list 700 ( access-li 700
permit 0000.0800.482c).on the remote-peer statement. DLSW only uses
non-canonical addressing.
HTH, Fred
----- Original Message -----
From: "Lim Meng Toon" <limmti@yahoo.com.sg>
To: <ccielab@groupstudy.com>
Sent: Friday, September 20, 2002 10:42 AM
Subject: DLSW non-conanical to conanical format question
> Hi All,
>
> Need some advice on the following:
>
> If I want to control only to allow explorer frames destine towards a
destination Ethernet Mac address across the dlsw peer connection,
>
> on the originating end of the dlsw peer, do I have to convert the Ethernet
conanical MAC address to non-conanical format when specifying it in the dlsw
remote peer....dmac-output-list command.
>
> Thanks
>
> Ivan Lim
>
> Yahoo! Mobile
> - Get cool ringtones and name logos for your phone!
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:58 GMT-3