From: McClure, Allen (Allen.McClure@Tricon-Yum.Com)
Date: Fri Sep 20 2002 - 15:34:56 GMT-3
Except for on ATM interfaces that don't support (i.e. 3640 12.0(7)T) it
in any but the newest code.
Elaborate on your frame-relay scenario. I've seen the problem you refer
to in many instances.
Allen McClure
MCSE, CCNP, CCDP
YUM! Brands, Inc.
Sr. Network Analyst
NEW E-Mail - mailto:allen.mcclure@yum.com
972-338-7494
-----Original Message-----
From: Brian McGahan [mailto:brian@cyscoexpert.com]
Sent: Friday, September 20, 2002 11:22 AM
To: 'kevin'; ccielab@groupstudy.com
Subject: RE: cdp nei on FR
Kevin,
CDP will run on any media that supports a SNAP header. CDP is
globally enabled by default. To enable/disable it use the global command
'[no] cdp run'. To enable/disable it on an interface, use the interface
command '[no] cdp enable'
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> kevin
> Sent: Friday, September 20, 2002 10:44 AM
> To: ccielab@groupstudy.com
> Subject: cdp nei on FR
>
> Hi,
>
> How can routers become cdp nei on FR ?
>
> Thanks
>
> Kevin
This communication is confidential and may be legally privileged. If you are not the intended recipient, (i) please do not read or disclose to others, (ii) please notify the sender by reply mail, and (iii) please delete this communication from your system. Failure to follow this process may be unlawful. Thank you for your cooperation.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:58 GMT-3