From: Mingzhou Nie (mnie@yahoo.com)
Date: Thu Sep 19 2002 - 16:09:28 GMT-3
Yes. It functions the same as "set port host" command which was
introduced in 5.x code.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/set_po_r.htm#xtocid573812
ming
--- Frank Maisano <FrankM@netarch.com> wrote:
> Interesting is the 'host' command that will take care of turning off
> trunking and channeling as well as spanning-tree portfast all with
> one
> command.
>
> L3-1(config-if)#switchport host
> switchport mode will be set to access
> spanning-tree portfast will be enabled
> channel group will be disabled
>
> L3-1(config-if)#
>
>
>
> -----Original Message-----
> From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
> Sent: Monday, September 16, 2002 3:50 PM
> To: ccielab@groupstudy.com
> Subject: 3550 Portfast
>
>
> Is there a command to add portfast to multiple ports at the same time
?
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3