From: Lim Meng Toon (limmti@yahoo.com.sg)
Date: Thu Sep 19 2002 - 15:06:42 GMT-3
Hi,
As an additional note, I think there is 3 possibilties:
1. Metric not set for redistributed routes to RIP
2. Different subnet mask for the redistributed routes from RIP
Sol: Summarize the routes to match that of RIP domain in OSPF (area range and summary)
3. Discontigous network routes.
Sol: use secinadry addressing or tunnelling
Regards,
Cheng Qian <toqian@cisco.com> wrote: Did you set the metric for redistribution?
At 12:14 AM 9/20/2002 +0800, chenyan wrote:
>Hi,guys
>
>I got a problem of the redistribution of ospf into rip. In the NBMA scene
>the hub is a multipoint subinterface and in devided into two subnet ,one
>with the ospf and the other with rip, I use the redistribution to each
>other, but only the rip networks are redistributed, but the ospf networks
>do not. why? Is there any differences when using redistribute between the
>seperated logical interfaces and the different phycial interfaces?
>
>Thanks
Yahoo! Mobile
- Get cool ringtones and name logos for your phone!
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3