From: beda jain (bpjain@cisco.com)
Date: Thu Sep 19 2002 - 12:49:38 GMT-3
Hi,
You can not do p2p but you can do p2m in your hub router for both the sub
interface and other side is main interface which is by default p2m and you
need nieighbor in hub.
That should work.
Thanks,
Beda
At 08:57 PM 9/18/2002 -0400, CTAlex405c@aol.com wrote:
>Configuring the FR your not allowed to use 'ip ospf network' or I would
>have done a p2p and p2m. I tried using 2 multipoint interfaces, one with
>frame map and one with frame interface-dlci. Not getting adjacencies,
>. In the debug getting "OSPF: No full nbrs to build Net Lsa for interface
>Serial0.2". Tried putting r1 at ospf priority 10 and the rest at 0. Can
>anyone give me a hint.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3