From: Prakash H Somani (pdsccie@rediffmail.com)
Date: Thu Sep 19 2002 - 06:28:39 GMT-3
Hi,
Config looks OK to me....Have u tried giving "ethernet-transit-oui
cisco" command and taking care of MTU below 1500 at the time of
ping ?
regards...Prakash
On Thu, 19 Sep 2002 VANGADASALAM,SURENDRAN (HP-Singapore,ex4)
wrote :
>Hi Group,
> I have a problem with my SR/TLB configuration.
>
>
>R8-------(Token Ring)---------R13--------(Ethernet)---R14
>
>
>I am trying to ping from the R8 to R14. But am unable to do so.
>The token
>ring is connected to 3920 switch. Below is the configuration. I
>have also
>turned off IP routing in R13.
>
>Router 13
>
>source-bridge ring-group 10
>source-bridge transparent 10 11 1 1
>!
>interface Ethernet0/0
> ip address 1.1.1.3 255.255.255.0
> no ip route-cache
> half-duplex
> bridge-group 1
>!
>interface TokenRing0/0
> ip address 1.1.1.4 255.255.255.0
> no ip route-cache
> ring-speed 16
> source-bridge 1 1 10
>
>
>Router 8
>
>interface TokenRing4/0
>ip address 1.1.1.2 255.255.255.0
>ring-speed 16
>
>Router 14
>
>interface Ethernet 0/0
>ip address 1.1.1.1 255.255.255.0
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3