From: Peng Zheng (zpnist@yahoo.com)
Date: Wed Sep 18 2002 - 01:22:53 GMT-3
Config:
R1(FE 0/0)--(FE 0/1)CAT3550(FE 0/3)--(FE 0/0)R3
|(FE 0/2)
R2(FE 0/0)-------------
FE 0/0 of R1 with ip 10.10.10.1/24 on VLAN1
FE 0/0 of R2 with ip 10.10.20.1/24 on VLAN2
FE 0/0 on R3 and FE 0/3 on CAT 3550 has been
configured as trunk.
VLAN3 is configured on CAT3550 with administration
address 10.10.20.2/24
Requirement:
1) Configure R3 to bridge VLAN2 and VLAN3.
2) Configure R3 so that VLAN1 need to routed with
VLAN2 and VLAN3.
IP on R3 is 10.10.20.3 to bridge VLAN2 and VLAN3.
CAT3550 has set up 10.10.20.3 as default gateway.
I can't figure it out.
Thank you for help.
Best Wishes,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3