From: Desimone, Aurelio (ADesimone@refco.com)
Date: Tue Sep 17 2002 - 22:59:52 GMT-3
You can only use a mac acl when bridging; looks like your best bet here is
to create a bvi
interface ethernet 0
bridge-group 1
bridge-group 1 input-address-list 701
interface bvi1
ip add x.x.x.x
-----Original Message-----
From: kpalmer [mailto:kip.palmer@verizon.net]
Sent: Tuesday, September 17, 2002 8:10 PM
To: ccielab@groupstudy.com
Subject: MAC ACL
Before I loose it,
How or can you apply a MAC ACL directly to an interface?
Or,.. is it applied via application/DLSW, etc.
I.E.,
access-list 700 deny 0006.0dba.71c8
access-list 700 permit 0000.0000.0000 ffff.ffff.ffff
interface ethernet 0
ip access-group 700 in
% Invalid access list name.
I tried it with 1100-1199, as well with no luck?
KPalmer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:55 GMT-3