From: Peng Zheng (zpnist@yahoo.com)
Date: Tue Sep 17 2002 - 17:41:52 GMT-3
Hi,
R1(bri 0)-----(bri 0)R2(e0)---(e0)R3
(e1)|________________________|(e1)
IGRP is run on all three routers.
Requirement:
1) R2 only dials R1 when the e0 to R3 is disconnected.
2) Snapshot and dialer watch can not be used.
I think I should use backup interface under e0 of R2.
Is it right?
If so, How should I configure the dialer-list?
And because two numbers are used. R2 need to dial
second if it can not connect to R1.
if:
dialer map ip 1.1.1.1 name r1 broadcast number1
dialer map ip 1.1.1.1 name r1 broadcast number2
is OK?
Thank you for help.
Best Wishes,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:54 GMT-3