From: Brian T. Albert (brian.albert@worldnet.att.net)
Date: Tue Sep 17 2002 - 17:03:14 GMT-3
You need to reset your BGP connection between the 2 routers.
clear ip bgp *
Brian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Guoqi Cui
Sent: Tuesday, September 17, 2002 2:08 PM
To: ccielab@groupstudy.com
Subject: timer bgp command
Hi, Group:
I use " timers bgp 300 1200" to change the hello
interval and holddown.
When I use " debug bgp keepalive" to check the update.
I still see the hello every 60 s instead of 300s.
I usethe command in both routers.
Then I try "neighbor X.X.X.X timers " in both routers.
I get the same result.
What is wrong with my configuration?
R5--------------------R6
R5:
router bgp 2001
timers bgp 300 1200
neighbor 165.10.160.6 route-reflector-client
neighbor 165.10.160.6 next-hop-self
neighbor 165.10.160.6 timers 300 1200
R6:
router bgp 2001
timers bgp 300 1200
neighbor 165.10.160.5 route-reflector-client
neighbor 165.10.160.5 next-hop-self
neighbor 165.10.160.5 timers 300 1200
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:54 GMT-3