From: beda jain (bpjain@cisco.com)
Date: Mon Sep 16 2002 - 14:15:03 GMT-3
Hi,
Do you also need to configure in both main interface and sub interface or
not ???
Tahnks,
Beda
At 06:57 PM 9/15/2002 -0700, Mingzhou Nie wrote:
>Chris,
>
>Didn't see your previous posting, but when you enable rtp header
>compression, make sure you enable on both ends of the frame relay link.
>If it's a hub-spoke topo, make sure you enable on all hub and spokes.
>
>Ming
>
>
>--- Chris Hugo <chrishugo@yahoo.com> wrote:
> > Hi Folks,
> >
> > I posted this a couple of days ago. But I didn't hear nothing from
> > the group. When I enable frame-relay ip rtp header compression on my
> > routers. My voip calls does not go through:( ...the ring is garbled
> > up and if I pick up the phone on the other end I receive static. On
> > the router I receive error messages stating no ring descriptor
> > available.
> >
> > I was wondering if anybody else ever came across this problem and if
> > so how did the fix it.
> >
> > thanx,
> >
> > chris hugo
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! News - Today's headlines
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! News - Today's headlines
>http://news.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:53 GMT-3