From: Brian Dennis (brian@5g.net)
Date: Sun Sep 15 2002 - 03:13:56 GMT-3
You can specify up to three default gateways on a Catalyst. The first
one you enter will be the preferred. To override this and manually
specify the preferred default gateway, use the "primary" keyword on the
end of the "set ip route" command.
Bart (enable) sho ip rout
Fragmentation Redirect Unreachable
------------- -------- -----------
enabled enabled enabled
The primary gateway: 10.1.1.3
Destination Gateway Flags Use
Interface
----------------------- ----------------------- ------ ----------
---------
default 10.1.1.3 UG 0 sc0
default 10.1.1.2 G 6 sc0
default 10.1.1.1 G 0 sc0
10.1.1.0 10.1.1.8 U 10 sc0
default default UH 0 sl0
Bart (enable)
I'll hate to see these switches go after Nov. ;-)
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kohli, Harbir
Sent: Friday, September 13, 2002 4:03 PM
To: 'ccielab@groupstudy.com'
Subject: alternate default gateways with IOS image on Catalyst?
Hi,
Can you do multiple default-gateways with IOS image on Catalyst. (this
if
you are not allowed to use HSRP )
When I type in a second address it overwrites the first address.
Thanks
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:52 GMT-3