From: Enrique Hernandez (enrique.hernandez@telindus.es)
Date: Sat Sep 14 2002 - 14:37:20 GMT-3
Hi Group!
Could anybody help me with a redistribution problem?
I got this scheme:
[Router1]------(RIP)-------[Router2]------(OSPF
A1)--------[Router3]--------(OSPF A0)---------[Router4]
I'm speaking RIP v1 between Router1 and Router2 and the mask of the
interfaces is 24 bits.
Between Router3 and Router4 there's OSPF area 0 and the mask of the
interfaces is 29 bits.
What can I do to redistribute the area 0 network into RIP throught the area
1?
I need that Router2 has the area 0 network but with 24 bit mask to
redistribute it (same as the rip interface) and "area 0 range" from area 0
to other area doesn't work to summarize, doesn't it?
Well, I'd be very gratefull if anybody could give me any clue.
Thanks a lot.
Regards,
Enrique Hernandez
Network Engineer
Technical Department
----------------------------------------------------------------------------
----------
Telindus Spain
Plaza Ciudad de Viena, 6 2*Planta
Torre Metropolitana
E-28040 Madrid
----------------------------------------------------------------------------
----------
<mailto: enhe@telindus.es>
tel: +34 91 456 00 08
fax: +34 91 536 10 74
----------------------------------------------------------------------------
----------
For more information about our products and services,
please visit our website: <http://www.telindus.es>
----------------------------------------------------------------------------
----------
Secure connectivity & mobility
>>>
29th Telindus International Symposium
Thursday, October 24, 2002
Brussel Expo, Brussels, Belgium
Meet over 2.000 business & ICT professionals for an in-depth networking
update at Telindus' 29th International Symposium.
Check out the programme, partners, workshops and register now for free:
http://www.telindussymposium.com
<<<
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3