From: Adarsh Singh (adarshs@hclinfinet.net)
Date: Fri Sep 13 2002 - 06:35:12 GMT-3
Hi Michael
Seeing the answer provided by you , i have a query , i have 2 leased libe
between the router ,R1 & R2 , now i have 8 dlci between them , which goes
further beyond R2 to router 3. Now i would like if one of the two leased
line is down , i woudl like my 8 pvc goes through the second leased line ,
how do i go about this one .
My R3 is connected via R2 thorugh passport (nortel) switches.
----- Original Message -----
From: "Michael Davis" <miked@netrus.net>
To: "CCIE Group Study (E-mail)" <ccielab@groupstudy.com>
Sent: Friday, September 13, 2002 3:45 AM
Subject: Fw: PPP over frame
> For the group...
>
> Mike #7303
>
> ----- Original Message -----
> From: "Michael Davis" <miked@netrus.net>
> To: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
> Sent: Thursday, September 12, 2002 12:31 AM
> Subject: Fw: PPP over frame
>
>
> > Hi Harbir,
> >
> > I've got a working config for you for a ppp multlink over a pair of
> > frame-relay circuits. Particularly important is the "no ip
route-cache."
> >
> > I was able to reproduce your issue. It seems that once you have
> configured
> > an interface-dlci without ppp, you cannot change it to include ppp
UNLESS
> > you remove the subinterface completely 'no interface s0/0.1', wr mem,
then
> > reload. Once you've done that, you can reconfigure the subinterface and
> the
> > 'frame-relay interface-dlci 111 ppp virtual-template1' with the
> appropriate
> > dlci.
> >
> > HTH,
> >
> > Mike #7303
> >
> >
> >
> > interface loopback2
> > ip address 1.1.1.1 255.255.255.252
> >
> > interface Virtual-Template1
> > bandwidth 3088
> > ip unnumbered loopback2
> > no ip route-cache
> > ppp multilink
> >
> >
> >
> > int serial0/0
> > encapsulation frame-relay ietf
> > int serial 0/0.1
> > frame-relay interface-dlci 117 ppp virtual-template1
> >
> >
> > interface Serial0/1
> > encapsulation frame-relay IETF
> >
> >
> > interface Serial0/1.401 point-to-point
> > frame-relay interface-dlci 401 ppp Virtual-Template1
> >
> >
> > ----- Original Message -----
> > From: "Michael Davis" <miked@netrus.net>
> > To: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
> > Sent: Wednesday, September 11, 2002 3:30 PM
> > Subject: Re: PPP over frame
> >
> >
> > > Hi Harbir,
> > >
> > > I haven't done it before, but I'll be trying some MLP over FrameRelay
> > > tonight on a pair of 2620s. I'll let you know how it goes. I'm running
> > > 12.1(5)T10 (image is c2600-is-mz.121-5.T10.) The parser is taking my
> DLCIs
> > > and allowing ppp without issue. But at one point, I removed my
> > > virtual-template, then tried to remove the "frame-relay interface-dlci
> 401
> > > ppp virtual-template 1" and the parser choked on "ppp" same as yours
> did.
> > I
> > > wonder if you need to configure a virtual-template before doing the
> serial
> > > interface/subinterfaces.
> > >
> > > Mike, #7303
> > >
> > > ----- Original Message -----
> > > From: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Wednesday, September 11, 2002 10:32 AM
> > > Subject: PPP over frame
> > >
> > >
> > > > Hi,
> > > >
> > > > Has anyone configured PPP over frame-relay?
> > > > Does anyone have a working config?
> > > > I am trying to apply my understanding of what I read in the
> > documentation
> > > > guide and not getting very far.
> > > > Two routers with frame-connection
> > > > R3-Frame-R4
> > > > R3 uses DLCI 304 to R4 and R4 uses DLCI 403.
> > > >
> > > >
> > > > R3(config-subif)#frame-relay interface-dlci 34 ?
> > > > cisco Use CISCO Encapsulation
> > > > ietf Use RFC1490/RFC2427 Encapsulation
> > > > protocol Optional protocol information for remote end
> > > > <cr>
> > > > R3(config-subif)#frame-relay interface-dlci 32 ?
> > > > cisco Use CISCO Encapsulation
> > > > ietf Use RFC1490/RFC2427 Encapsulation
> > > > ppp Use RFC1973 Encapsulation to support PPP over FR
> > > > protocol Optional protocol information for remote end
> > > > If I use a DLCI number other than 32 the CLI does not even allow me
to
> > > > specify the PPP option.
> > > > Any suggestions?
> > > >
> > > > Thanks
> > > > __________________________________________________________________
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3