From: Frank Jimenez (franjime@cisco.com)
Date: Fri Sep 13 2002 - 23:14:02 GMT-3
Thanks all -
I didn't state my original question well. What I was looking for was
something that stated what was considered 'level 15' by default. I
didn't know about the 'level 0' commands, so that was interesting - what
commands are 'level 15'?
Frank Jimenez
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
michael liu
Sent: Friday, September 13, 2002 7:32 PM
To: ccielab@groupstudy.com
Subject: RE: OT: Default Privilege Levels
you could change privilege level for specific command, if you use
privilege command to
specify what level that command is allowed to execute.
~ml
>From: Brian Dennis >Reply-To: Brian Dennis >To:
Danny.Wang@alderwoods.com >CC: ccielab@groupstudy.com >Subject: RE: OT:
Default Privilege Levels >Date: Fri, 13 Sep 2002 15:55:32 -0700 > >Are
you referring to this site? > >http://boerland.com/dotu/ > >Brian
Dennis, CCIE #2210 (R&S/ISP Dial) > >-----Original Message----- >From:
Danny.Wang@alderwoods.com [mailto:Danny.Wang@alderwoods.com] >Sent:
Friday, September 13, 2002 3:43 PM >To: Brian Dennis >Cc:
ccielab@groupstudy.com; nobody@groupstudy.com >Subject: RE: OT: Default
Privilege Levels > > >Unless he's looking for some undocumented command.
I've seen a web site >before, just could not find it now. > >To see the
availabe command's privilege level you're using, enter ? at >the
>command line when logged in at that privilege level if there is router
>availabe
:-) > > > > > > > Brian Dennis > > To: >ccielab@groupstudy.com > Sent
by:
cc: > > nobody@groupstudy Subject: RE: OT: Default >Privilege Levels >
.com > > > > > > 09/13/2002 02:33 > > PM > > Please respond to > > Brian
Dennis > > > > > > > > > >I think he was asking if there is somewhere
where each command's >privilege level is documented. > >The only thing
that I've seen is in the documentation they use the term >EXEC and
privileged EXEC which I interpret as level 1 and level 15. > >Brian
Dennis, CCIE #2210 (R&S/ISP Dial) > > > >-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Danny.Wang@alderwoods.com >Sent: Friday, September 13, 2002 1:59 PM
>>To:
Frank Jimenez >Cc: ccielab@groupstudy.com >Subject: Re: OT: Default
Privilege Levels > >By default, there are three privilege levels on the
router: > privilege level 1 = non-privileged (prompt is router>), the
>default > level for login > privilege level 15 = privileged (prompt is
router#), the level >after > going into enable mode > privilege level 0
= seldom-used, but includes 5 commands: disable, > enable, exit, help,
and logout > > >Levels 2-14 are not used in a default configuration, but
commands that >are >normally at level 15 can be moved down to one of
those levels and >commands >that are normally at level 1 can be moved up
to one of those levels. >Obviously, this security model involves some
administration on the >router. >To determine the privilege-level as a
logged in user, type the show >privilege command. > > > > > > > > > > >
"Frank Jimenez" > > > > om> cc: > > Sent by: Subject: OT: Default
>Privilege Levels > nobody@groupstudy > > .com > > > > > > 09/13/2002
01:33 > > PM > > Please respond to > > "Frank Jimenez" > > > > > > > > >
>All, >Anyone know of a resource that shows the default privilege levels
of IOS >commands? > >Thanks, >Frank Jimenez, CCIE #5738
>franjime@cisco.com
------------------------------------------------------------------------
MSN Photos is the easiest way to share and print your photos: Click Here
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3