From: Larson, Chris (CLarson@usaid.gov)
Date: Fri Sep 13 2002 - 15:39:41 GMT-3
I believe they are asking you to enable backbone fast and set a forward
delay of 30 seconds.
Both can be found by searching CCO. Backbone fast. Forward delay.
> -----Original Message-----
> From: beda jain [SMTP:bpjain@cisco.com]
> Sent: Friday, September 13, 2002 2:01 PM
> To: beda jain; ccielab@groupstudy.com
> Subject: Re: question on cat 5 and 3550
>
> this is from routopia lab 2 section 4
> At 12:45 PM 9/13/2002 -0400, beda jain wrote:
> >Hi All,
> > configure both in cat 5 and 3550.
> >1. Configure so that switch will respond to root link queries.
> >
> >2. configure the forward delay on vlan 1 to reflect that of a spanning
> >tree diameter of two switches.
> >
> >Thanks,
> >Beda
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3