From: Manish Gupta (manishgu@cisco.com)
Date: Thu Sep 12 2002 - 20:57:14 GMT-3
Paul
You don't need to specify anything under Physical interface on Central
site.
Just configure IP address and 'encpasulation frame-relay" under Physical
interface.
Inverse-ARP will take care of mapping both Remote site's IP address to
Local DLCIs .
-Manish
On Fri, 13 Sep 2002, Casey, Paul (6822) wrote:
> Working on a lab at the moment..!!
> Need to configure a frame relay link from the central site with one physical
> interfaces to 2 remote sites..
>
> Normally I would use a multipoint sub interface.. To do this with 2 dlci's
> on the central site.
>
> However the lab specifies no sub interface#s allowed.
>
> How do I configure this on cental site with no sub interface
> do I just configure on the serial interface and use 2 dlci's as normal...???
>
> Any help appreciated
> Kind regards.
> Paul.
> --------------------------
> Sent from my BlackBerry Wireless Handheld
>
>
> ****************************************************************************************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> *****************************************************************************************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3